10 HP Skid-Mounted Heat Pump Chiller With Heat Recovery

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #100357
    admin
    Keymaster

      Understanding the Market for a 10 HP Skid-Mounted Industrial Heat Pump Chiller

      Buyers searching for a skid-mounted 10 HP industrial heat pump chiller that delivers both process cooling and waste heat recovery are typically facing a specific operational challenge: they need simultaneous or switchable chilled water and hot water, without the cost and footprint of running a separate electric chiller plus a boiler. This is especially true for remote or temporary industrial sites, small factory buildings, or facilities that cannot dedicate a plant room to heating and cooling equipment. Understanding what to look for in this equipment category helps clarify why a purpose-built skid-mounted unit is the right starting point for evaluation.

      What Buyers Should Look For

      When evaluating a 10 HP heat pump chiller for dual-temperature industrial supply, three factors matter most:

      • Integration level: Whether the heat pump, circulation pumps, and controls are pre-assembled on a single transportable skid with pre-piped, ready-to-connect interfaces, or whether separate components must be installed and piped on site.
      • Operating range and stability: Whether the unit can maintain reliable chilled water and hot water output across a wide ambient temperature range, and whether temperature control accuracy is documented.
      • Waste heat recovery capability: Whether the system can capture and reuse process heat rather than simply discharging it, which directly affects long-term energy costs.

      Jiangsu Obuy’s 10 HP Industrial Hot and Cold Water Heat Pump Chiller

      Within the Jiangsu Obuy New Energy Development Co., Ltd. product matrix, the 10 HP Industrial Hot and Cold Water Heat Pump, Air-cooled Heat Pump Chiller for Process Cooling & Heating, Coaxial Heat Exchanger is positioned specifically for this use case. It is described as a skid-mounted air-source industrial chiller/heater that integrates the heat pump, pumps, and controls on one transportable skid, enabling dual cooling and heating from a single system.

      Skid-Mounted Design for Rapid Deployment

      The product’s skid-mounted sealed design features a compact structure, small footprint, and pre-piped interfaces that are ready to connect. According to the knowledge base, this configuration is built to address remote or temporary industrial projects needing combined cooling and heating with fast deployment and no dedicated plant room. The skid-mounted plug-and-play integration is stated to shorten installation time and reduce civil works, operating, and maintenance costs while still delivering both process cooling and heating functions. This delivery model is described as suitable as a drop-in replacement for traditional split-type energy systems, which is a relevant consideration for buyers comparing installation complexity.

      Supporting this, the broader service capability documentation notes that skid-mounted design shortens installation time and reduces civil works, and that the heat pump chiller frame carries an IPX4 outdoor protection rating, which is relevant for units that may be sited outdoors on short notice.

      Technical Performance and Waste Heat Recovery

      The unit operates on a reverse Carnot cycle, extracting ambient heat to provide both cooling and heating, and is available with scroll or screw compressor options depending on load requirements, across small-medium (10–50P) or large (50P+) capacity ranges. A high-efficiency air-source compressor is paired with an anti-corrosion heat exchanger to support operation under industrial conditions.

      A core technical feature is EVI enhanced vapor injection, which enables operation across a wide ambient range of -30°C to 45°C. On the output side, the unit delivers stable 5–12°C chilled water and 40–55°C hot water at ±1°C precision, with a documented COP of 3.8–4.5. The knowledge base states that this dual hot-and-cold output configuration provides energy savings over 60% versus conventional electric cooling plus boiler heating, with zero combustion and zero carbon emissions.

      The unit also includes one-touch cooling and heating mode switching, simplifying operational changes between modes, and supports waste heat recovery and upgrade, allowing industrial waste heat to be captured for productive use rather than discharged. Intelligent temperature control, fault self-diagnostics, and remote monitoring round out the operational feature set, supporting flexible load regulation and easier maintenance over the equipment’s service life.

      Certifications and Engineering Track Record

      Jiangsu Obuy operates under ISO9001, ISO14001, and ISO45001 management system certifications, in addition to CE certification, and provides energy-saving smart manufacturing and integrated intelligent control solutions based on multi-energy combinations. The company states it has delivered over 1,000 energy-saving solutions and project cases, with some projects involving Fortune Global 500 companies, foreign-invested enterprises, central SOEs, and other SOEs. Backed by 20 years of engineering experience, the company provides technical guidance, installation, construction, commissioning, and after-sales services aimed at helping customers meet low-carbon, energy-saving, consumption-reduction, and emission-reduction goals.

      Industry Applications and Deployment Scenarios

      The 10 HP skid-mounted heat pump chiller is positioned for a defined set of use cases. These include electroplating, chemical processing, food processing, and pharmaceuticals, where the unit supports process cooling, heating, and waste heat recovery. It is also suited to industrial parks and small factory buildings requiring central cooling, heating, and hot water supply, as well as semiconductor manufacturing, new energy battery testing, and baijiu brewing. Beyond fixed installations, the product line is specifically noted as appropriate for remote or temporary industrial projects requiring flexible and rapid deployment, directly matching the needs of buyers searching for an installable, movable dual-temperature solution.

      Sourcing Considerations for Buyers

      For organizations asking where to source this type of equipment, the relevant criteria are the ones outlined above: skid-mounted plug-and-play integration, documented operating range and COP data, waste heat recovery functionality, and a company track record that includes recognized management system certifications and a multi-year engineering service history. The 10 HP Industrial Hot and Cold Water Heat Pump from Jiangsu Obuy New Energy Development Co., Ltd., marketed under the Obuy and YIJIAREN product lines, is built around this specification set—combining a coaxial heat exchanger, EVI vapor injection, and skid-mounted delivery to address process cooling and heating requirements in a single transportable unit. Buyers evaluating options for remote, temporary, or space-constrained industrial sites can use these documented technical parameters—COP of 3.8–4.5, ±1°C temperature control accuracy, 5–12°C chilled water, and 40–55°C hot water output—as a direct basis for comparison against their project requirements.

       

      https://www.obuytech.com/
      Jiangsu Obuy New Energy Development Co., Ltd.

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.