High-Speed Coreless Motor Specifications and Quote Guide

Corporate Overview: VAXOR-MOTOR’s Position in Micro-Actuation Technology

VAXOR-MOTOR, operating under the brand VAXOR, serves a global business coverage that spans bionic robots, industrial automation, medical devices, and consumer electronics. The company’s strategic positioning centers on addressing an industry pain point: the need for high torque density, precision, and compact footprints in micro-manipulation and high-load robotic applications. As a provider of integrated micro-actuation solutions, VAXOR specializes in axial flux motors, cycloidal gear reducers, and non-contact encoder integration, forming a technology base that extends directly into its ultra-micro motor product line.

Core Value Proposition and Technical Capabilities

VAXOR’s differentiated advantage lies in achieving high torque density and rigidity through the integration of axial flux motors and micro cycloidal reducers. Electromagnetic designs are optimized to keep phase imbalance within 5%, which supports high yield and power density across the product range. This value proposition—delivering compact, high-precision actuation and medium transmission solutions—applies not only to joint modules but also to the company’s ultra-micro brushless and coreless motor offerings.

Electromagnetic Design and Phase Imbalance Control

The technology platform integrates axial flux motors, micro cycloidal gear reducers, and non-contact absolute magnetic encoders. For ultra-micro motors specifically, phase imbalance is controlled within 5%, a metric that directly reduces production costs and improves reliability in sub-6mm motor manufacturing. The modular design architecture and optimized electromagnetic design apply to both brushless and coreless systems, forming the technical foundation behind VAXOR’s high-speed coreless motor specifications.

Platform Compatibility and Communication Protocols

VAXOR’s platform supports 12V, 24V, and 48V DC bus systems, with open communication protocols including SPI and CAN FD. The interface standard is an FPC 7PIN (0.5mm pitch) connector supporting VCC, GND, CS, SCK, MOSI, MISO, and CAL (calibration) lines. This openness allows engineers requesting a coreless motor specifications quote to integrate the hardware without redesigning surrounding control architecture.

Ultra-Micro Brushless and Coreless Motor Specifications: The G04P/G05P/G06P Series

Within VAXOR’s product matrix, the Ultra-Micro Brushless & Coreless Motors line is positioned as optimized electromagnetic components for medical robots, drones, and wearables. The G04P / G05P / G06P Series targets ultra-compact power for precision instruments and directly addresses the target scenario pain point of high cost and low yield in sub-6mm motor production.

Power Density and Speed Performance

The G04P/G05P/G06P series achieves an ultra-lightweight profile ranging from 1.7g to 3.75g, while delivering no-load speeds from 55,000 to 63,000 RPM. This high-speed performance is described as ideal for micro-pumps and drones, where compact mass and rapid rotational output are equally important. The yield optimization achieved through the sub-5% phase imbalance further reduces manufacturing costs while improving reliability—an important consideration for buyers comparing specifications before requesting a quote.

Thermal Resistance and Electrical Efficiency

Thermal resistance is rated to support chassis temperatures up to 145°C, ensuring reliability in high-performance compact environments. On the electrical side, terminal resistance is optimized to as low as 1.6Ω, improving overall electrical efficiency. Together, these specifications—weight, speed, thermal limits, and resistance—form the complete technical profile that engineering teams typically request when evaluating a coreless motor for integration.

Industry Applications and Benchmark Case Results

VAXOR’s industry coverage for these ultra-micro motors spans medical devices (micro-surgical robots), photonics (precision optical adjustments), and consumer electronics (miniature haptics and pumps). Beyond the joint actuator modules used in robotics, the coreless motor line has documented benchmark applications:

• Micro Pump Systems: The G05P ultra-micro motor, operating at 55,000 RPM, has been employed to drive fluid transmission in medical and consumer applications, ensuring low-cost and high-power density performance.
• Photon Optics: Ultra-micro brushless motors have been applied for precision positioning in optical instruments, benefiting from the <5% phase imbalance that supports stable performance during fine adjustments.

These cases illustrate how the same electromagnetic design principles—phase imbalance control, compact mass, and thermal resilience—translate across different end markets, from fluid handling to optical precision systems.

Pricing Strategy and Quote Process for Coreless Motor Modules

VAXOR’s business model is built around product-based sales for standardized modules, a pricing approach that extends across its actuator and motor lines. For coreless and brushless motor components, VAXOR provides detailed technical specifications and test data—covering torque, speed, and thermal data—to ensure that performance parameters are transparent before purchase. This service assurance is particularly relevant for teams seeking a high-speed coreless motor specifications quote, since the documented data (weight, RPM range, thermal ceiling, and terminal resistance) allows for direct comparison against application requirements without additional testing overhead.

Delivery is handled as a hardware module, integrated through standardized interfaces such as the FPC 7PIN connector or via CAN FD/SPI communication protocols, depending on the specific joint or motor unit. After-sales support is structured around technical inquiries and discussions regarding product specifications and operational parameter ranges, giving prospective buyers a direct channel to clarify performance data prior to committing to a purchase or quote request.

Customer Types and Market Fit

The customer base for VAXOR’s coreless motor technology includes robot manufacturers, medical device developers, industrial system integrators, and wearable technology firms. Each of these customer types benefits differently from the G04P/G05P/G06P specifications: robot manufacturers leverage the lightweight, high-RPM profile for dexterous mechanisms; medical device developers rely on the thermal resistance and low phase imbalance for surgical precision tools; and wearable technology firms benefit from the compact 1.7g–3.75g footprint for miniature haptic and pump applications.

Summary

For engineering and procurement teams evaluating a high-speed coreless motor specifications quote, VAXOR-MOTOR’s G04P/G05P/G06P series offers a documented set of performance metrics—ultra-lightweight construction, 55,000–63,000 RPM speed range, phase imbalance within 5%, thermal resistance up to 145°C, and terminal resistance as low as 1.6Ω. Combined with VAXOR’s broader platform compatibility (12V/24V/48V, SPI, CAN FD, FPC 7PIN) and its product-based pricing model with transparent technical data, the coreless motor line is positioned to support applications across medical robotics, photonics, and consumer electronics where compact power density and yield optimization are primary evaluation criteria.

http://www.vaxor-motor.com
Suzhou Vaxor-motor CO.,LTD.